Albatron PX865PE PRO II
« Introduction Board Overview »
2. Specifications
Features
- Intel Pentium® 4 Processor (Northwood/Prescott)
- Socket 478 with FSB 400/533/800/1200(by overclocking ) MHz ( FSB1.2G Hz + setting available by overclocking )
- 4 DDR400/333/266 Memory Sockets ( Dual Channel DDR400)
- Built-in VIA Envy 24PT with 8 channel Audio Support (Bundle SPDIF2 Card Optional)
- Intel 1Gbits LAN (CSA Port)
- 2 Serial ATA150 Channels, Intel Serial ATA RAID 0
- Promise RAID 0,1/ATA133
- 2 IEEE1394a Ports
- 2 ATA100 Channels, up to 4 ATA 100 IDE Devices
- 8 USB 2.0/1.1 Ports (6 ports by optional cable)
- BIOS Mirror™
- Voice Genie™
Processor
- Socket 478 Intel Pentium® 4 Processor (Northwood/Prescott)
FSB
- 400/533/800/1200 MHz (FSB1.2G Hz setting available by overclocking)
Chipset
- North Bridge : Intel 865PE
- South Bridge : Intel ICH5R
- LAN Chip : Intel 82547EI ET LAN chip (CAS Port)
- IEEE1394 Chip : VIA VT6307
- Audio Chip : VIA VT1720 Envy 24PT
- I/O Chip: Winbond Smart I/O W83627HF
- Promise Chip: Promise PDC20276 Controller
Memory
- 4 * DDR Sockets: DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
- Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
- Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
- Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400
Expansion Slots
- 1 x AGP(3.0) 8X slot (1.5V only)
- 5 x PCI slots (PCI 2.3 compliant)
IDE Connectors
- 2 ATA100/66 Channels, up to 4 ATA 100 IDE devices
- Promise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133
Onboard I/O Connectors
- 1 x Floppy Connector
- 3 x USB 2.0/1.1 header (6 ports by optional cable)
- 2 x IEEE1394 header (2 ports IEEE1394 cable optional)
- 1 x CD_IN header
- 1 x S/PDIF in/out header (S/PDIF in/out cable optional)
- 1 x CPU fan header (1 fan rotation detection function)
- 2 x System fan headers (2 fan rotation detection function)
- 2 x 5pin system panel header (Intel spec)
- 1 x 3 pin Power LED header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header
- 1 x Case Open detection header
- 2 x 5 pin Com port header
- 2 x 8 pin Game Port header
I/O via Back Panel
- PS/2 keyboard/mouse
- 2 x USB (2.0/1.1)
- RJ45,1 x Com (serial)
- 1 x Parallel
- 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
BIOS Feature
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- Socket 478 Intel Pentium® 4 Processor (Northwood/Prescott)
FSB
- 400/533/800/1200 MHz (FSB1.2G Hz setting available by overclocking)
Chipset
- North Bridge : Intel 865PE
- South Bridge : Intel ICH5R
- LAN Chip : Intel 82547EI ET LAN chip (CAS Port)
- IEEE1394 Chip : VIA VT6307
- Audio Chip : VIA VT1720 Envy 24PT
- I/O Chip: Winbond Smart I/O W83627HF
- Promise Chip: Promise PDC20276 Controller
Memory
- 4 * DDR Sockets: DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
- Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
- Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
- Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400
Expansion Slots
- 1 x AGP(3.0) 8X slot (1.5V only)
- 5 x PCI slots (PCI 2.3 compliant)
IDE Connectors
- 2 ATA100/66 Channels, up to 4 ATA 100 IDE devices
- Promise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133
Onboard I/O Connectors
- 1 x Floppy Connector
- 3 x USB 2.0/1.1 header (6 ports by optional cable)
- 2 x IEEE1394 header (2 ports IEEE1394 cable optional)
- 1 x CD_IN header
- 1 x S/PDIF in/out header (S/PDIF in/out cable optional)
- 1 x CPU fan header (1 fan rotation detection function)
- 2 x System fan headers (2 fan rotation detection function)
- 2 x 5pin system panel header (Intel spec)
- 1 x 3 pin Power LED header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header
- 1 x Case Open detection header
- 2 x 5 pin Com port header
- 2 x 8 pin Game Port header
I/O via Back Panel
- PS/2 keyboard/mouse
- 2 x USB (2.0/1.1)
- RJ45,1 x Com (serial)
- 1 x Parallel
- 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
BIOS Feature
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- North Bridge : Intel 865PE
- South Bridge : Intel ICH5R
- LAN Chip : Intel 82547EI ET LAN chip (CAS Port)
- IEEE1394 Chip : VIA VT6307
- Audio Chip : VIA VT1720 Envy 24PT
- I/O Chip: Winbond Smart I/O W83627HF
- Promise Chip: Promise PDC20276 Controller
Memory
- 4 * DDR Sockets: DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
- Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
- Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
- Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400
Expansion Slots
- 1 x AGP(3.0) 8X slot (1.5V only)
- 5 x PCI slots (PCI 2.3 compliant)
IDE Connectors
- 2 ATA100/66 Channels, up to 4 ATA 100 IDE devices
- Promise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133
Onboard I/O Connectors
- 1 x Floppy Connector
- 3 x USB 2.0/1.1 header (6 ports by optional cable)
- 2 x IEEE1394 header (2 ports IEEE1394 cable optional)
- 1 x CD_IN header
- 1 x S/PDIF in/out header (S/PDIF in/out cable optional)
- 1 x CPU fan header (1 fan rotation detection function)
- 2 x System fan headers (2 fan rotation detection function)
- 2 x 5pin system panel header (Intel spec)
- 1 x 3 pin Power LED header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header
- 1 x Case Open detection header
- 2 x 5 pin Com port header
- 2 x 8 pin Game Port header
I/O via Back Panel
- PS/2 keyboard/mouse
- 2 x USB (2.0/1.1)
- RJ45,1 x Com (serial)
- 1 x Parallel
- 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
BIOS Feature
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- 1 x AGP(3.0) 8X slot (1.5V only)
- 5 x PCI slots (PCI 2.3 compliant)
IDE Connectors
- 2 ATA100/66 Channels, up to 4 ATA 100 IDE devices
- Promise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133
Onboard I/O Connectors
- 1 x Floppy Connector
- 3 x USB 2.0/1.1 header (6 ports by optional cable)
- 2 x IEEE1394 header (2 ports IEEE1394 cable optional)
- 1 x CD_IN header
- 1 x S/PDIF in/out header (S/PDIF in/out cable optional)
- 1 x CPU fan header (1 fan rotation detection function)
- 2 x System fan headers (2 fan rotation detection function)
- 2 x 5pin system panel header (Intel spec)
- 1 x 3 pin Power LED header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header
- 1 x Case Open detection header
- 2 x 5 pin Com port header
- 2 x 8 pin Game Port header
I/O via Back Panel
- PS/2 keyboard/mouse
- 2 x USB (2.0/1.1)
- RJ45,1 x Com (serial)
- 1 x Parallel
- 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
BIOS Feature
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- 1 x Floppy Connector
- 3 x USB 2.0/1.1 header (6 ports by optional cable)
- 2 x IEEE1394 header (2 ports IEEE1394 cable optional)
- 1 x CD_IN header
- 1 x S/PDIF in/out header (S/PDIF in/out cable optional)
- 1 x CPU fan header (1 fan rotation detection function)
- 2 x System fan headers (2 fan rotation detection function)
- 2 x 5pin system panel header (Intel spec)
- 1 x 3 pin Power LED header
- 1 x Front audio header (Intel spec)
- 1 x IrDA header
- 1 x Case Open detection header
- 2 x 5 pin Com port header
- 2 x 8 pin Game Port header
I/O via Back Panel
- PS/2 keyboard/mouse
- 2 x USB (2.0/1.1)
- RJ45,1 x Com (serial)
- 1 x Parallel
- 1x Line-in/Line-out(Speaker Out)/MIC/SUR_CEN/SUR/R:WOF,L:CEN
BIOS Feature
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- 4Mb Flash EEPROM
- Award BIOS with ACPI
- DMI 2.0
- PnP
- WfM 2.0
- GreenSuspend to RAM (S3)
- Suspend to Disk (S4)
- Wake on keyboard/mouse
- Wake on LAN/RTC Timer
Hardware Monitoring
- 3FAN sensors, CPU/System voltages and temperature monitoring
Speial Feature
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
- Zero Jumper Design
- BIOS Mirror™ Protect BIOS by creating an original mirror image of itself
- Voice Genie™ Voice Troubleshooting system (four-Language)
- Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
- Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
- AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)
Form Factor
- ATX (244mm x 305mm)
« Introduction Board Overview »
There is no thread for discussion of this review yet.